- Firmware: add VERSION? command returning BUILD_NR for version check
- Android: flash button checks firmware version first, skips flash if current
- After flash: auto key exchange via reboot detection (expectingReboot flag)
- device_filter.xml + intent-filter: USB permission 'always allow' checkbox
- singleTop + onNewIntent prevents unwanted SettingsActivity launch on USB connect
- platformio.ini: upload_port updated to /dev/ttyACM1
- Firmware: add explicit setScanResponseData with setCompleteServices for
128-bit service UUID so Android ScanFilter finds the device
- Android: hexStringToBytes accepts any even-length hex (fixes UUID=32chars
failing the hardcoded 64-char check)
- Android: onActivityResult matches SettingsActivity.RESULT_SCAN instead of
Activity.RESULT_OK
ESP firmware:
- Store HMAC key in NVS via Preferences library instead of compile-time
hmac_key.h
- KEY? responds with HMAC_KEY:<hex> (if provisioned) or NO_KEY
- New SET_KEY:<64-hex> command stores key in NVS and responds OK
- Boot messages updated to reflect provisioning state
Android app:
- UsbKeyReceiver detects NO_KEY response and auto-provisions:
generates random 32-byte key via SecureRandom, sends SET_KEY,
waits for OK, saves key to SharedPreferences
- Read loop now breaks on both HMAC_KEY: and NO_KEY responses
Cleanup:
- Removed tools/generate_hmac_key.py and src/hmac_key.h
- Removed hmac_key.h from .gitignore
- README updated for new provisioning flow
USB auto-read:
- ESP responds to 'KEY?\n' over USB serial with 'HMAC_KEY:<hex>'
- Android UsbKeyReceiver (manifest BroadcastReceiver) catches USB_DEVICE_ATTACHED
- Filters on Espressif vendor 0x303a, requests USB permission
- Opens CDC-ACM serial (115200), sends KEY?, parses response, saves to SharedPreferences
- Works even when app not in foreground
- usb-serial-for-android v3.7.3 via JitPack
UI redesign:
- activity_main.xml: FrameLayout with settings icon top-right, relay button center, status bottom-left (14sp)
- Scan & Connect button moved to SettingsActivity
- SettingsActivity: hint text 'Voer de HMAC sleutel in of sluit de relaismodule aan op de telefoon'
- SettingsActivity: scan button saves key + returns RESULT_OK to trigger scanning
- MainActivity: removed scanButton, auto-scan on onResume when key is set
- Back button removed from settings (ActionBar up navigation only)
README updated with USB protocol docs, new UI description, and updated setup guide
